How to install
Myths About Pavers
Before and After
News & Media
Where To Buy
Our hardscapes are available in an elegant selection of concrete pavers, retaining walls, stepping stones and edging.
Tree Rings and Edgers
Garden and Vegetable Beds
How to Install a Walkway
Click Here To See
An Installation Video
Pavers and Stepping Stones are used for flat surface projects such as patios, walkways, pathways, etc.
The amount of product you will need depend on the size of your project.
Here is some basic installation instructions and tips for installing pavers and patio stones.
Tools You Will Need
1" Wood Pieces and Straight Plank
Vibrating Plate (Rental)
Step 1. Design It.
Step 2. Excavate.
Step 3. Check Slope.
Mark the area where your pavers will go with stakes and string.
Dig out an area 4"-6" deep remove dirt.
Try to keep bottom as level and hard as you can.
Many pavements are sloped at 2% or 1/4" per every foot of pavement as this will better facilitate drainage.
Step 4. Prep Base.
Step 5. Lay Stones.
Step 6. Sweep Sand.
Add paver base and tamp. Add paver sand and screed, or level.
Lay them side-by-side.
Fill the joints between the stones with paver sand by sweeping some back and fourh over the stones.